(03) 9583 0965 bruce@gbrand.com.au
Perhaps, one of the best times to renovate the bathroom of your property is during the spring season. The weather during this specific season is not yet too hot, which is why it would be great for you to find a contractor who can modify some elements of your bathroom.
Some elements of your bathroom that they can renovate are the doors, walls, ceiling, and flooring. These elements can be modified based on the current design trend. Your contractor can likewise improve your toilet by obtaining the one that can save a lot of water. Even your vanity area can be renovated so that it can easily fit all the things that are needed inside the bathroom.
Two more elements that your contractor can alter are the bathroom shower and tap. Changing them can be a great way for you to save more water and ensure the safety of your family. Fortunately, adding a Mixermate thermostatic shower and tap can do these things for your bathroom. The following are some more things that you should know about them.
Water-Saving Feature
One of the things that you should know about Mixermate thermostatic shower and tap is that they can easily save a lot of water. Conventional showers and taps are typically connected to water heaters for them to generate an adequate hot water supply. These fittings, however, often waste a huge amount of water before reaching the desired temperature of the water supply. Mixermate thermostatic shower and tap, alternatively, do not waste water since they can produce the needed water temperature instantly.
Easy Simple Controls
Another thing that you should know about Mixermate thermostatic shower and tap is they can offer easy and simple controls. The shower and tap from Mixermate can be controlled and regulated through a lever. After few minutes of testing the lever, you and other people can easily control the temperature of the water output. You can likewise regulate the maximum water flow of the shower and tap. The easy controls of the Mixermate thermostatic shower and tap can make your lives more convenient.
Guaranteed Safety
Given the easy controls of Mixermate thermostatic shower and tap, they can effectively prevent the elderly, disabled, and those with arthritic conditions from scalding incidents. The dependence of these bathroom fittings in a lever makes their operations easier and safer, especially for those that have difficulties controlling the conventional showers and taps. Even children and adults who are already strong can take advantage of the inclusion of lever to the Mixermate thermostatic shower and tap.
Modern Appearance
Aside from being functional and safe, Mixermate thermostatic shower and tap can also be perfect for your bathroom renovation due to their modern appearance and minimal form factor. The cover of these fittings can serve as the shelf for soaps, shampoos, and other similar products. Their components can likewise feature colours of white to almond-ivory, making them suitable to most themes of modern bathrooms. Stainless steel models are also available if you want to enhance your bathroom further.
To know more about Mixermate thermostatic shower and tap, you can call us at Mixermate Australia.
Smelly clothes can easily ruin the overall environment of a property, especially if they are not stored properly. Hence, property owners have to ensure that they have a fully equipped laundry room. A fully equipped laundry room would normally contain a washer, a dryer, a laundry rack, and a drying rack. Another element that this specific room should have would be a stable source of water.
Properties are expected to possess a stable source of water. The only thing that property owners like you should consider is the type of fittings that will supply the said water.
One type of fitting that is heavily recommended in laundry rooms is a thermostatic mixer tap. A thermostatic mixer tap typically maximises a valve that would combine hot and cold water to effectively generate water according to one’s preselected temperature. Apart from its wonderful working principles, here are some more reasons why you should add a thermostatic mixer tap in your laundry room.
Adding a thermostatic mixer tap in your laundry room is highly recommended as it can enhance the safety of anyone who will be using the said room. The thermostatic mixer tap has mechanisms that would not only prevent water temperature fluctuations but also regulate the flow of water. With these mechanisms, anyone who will be doing the laundry will be safe from any associated risks of scalding. Surprising shocks out of too much hot or cold water are likewise eliminated with this type of fitting.
Aside from enhancing the safety inside your laundry room, adding a thermostatic mixer tap is truly recommended since it can regulate the usage of water. Laundry rooms tend to consume a lot of water just to ensure that the clothes will be washed and cleaned thoroughly. But with a thermostatic mixer tap, you can easily regulate and control the water usage of your laundry room since it spontaneously changes the water temperature without wasting any water.
One more reason why you should integrate a thermostatic mixer tap into your laundry room is that it can offer improved access over its operations. Conventional taps can be operated in various complex ways. Dialling the temperature and the flow of your water with a thermostatic mixer tap, alternatively, can be done easily by just moving the tap in a specific direction. The convenience that this tap brings to your property can ensure that anyone who will be doing the laundry can instantly do it.
Thanks to the ability of the thermostatic mixer tap to regulate water consumption, you can expect to gain significant savings in terms of your utility bills. Thermostatic mixer taps, as previously stated, can instantly convert the temperature of the water without undergoing warming procedures that are known to consume a lot of water. As water is saved, your total usage of water when converted into monetary value will decrease significantly, allowing you to save some money and spend it on other necessary items.
To obtain a thermostatic mixer tap in your laundry room, you can call us at Mixermate Australia.
Water plays many roles here on Earth. For us humans, water can keep us hydrated all the time. It can likewise cleanse our bodies as well as provide more health benefits. Animals and plants also maximise water to keep themselves alive.
Earth itself can take advantage of the water. With an adequate supply of water, natural processes such as the water cycle can take place. The presence of water can also help maintain the optimal temperature of the planet.
All these things about water make it very important for everyone to save it. Fortunately, the act of saving and conserving water can be done even at home.
Primary Reasons behind Conservation of Water
Given the importance of water to all living things on this planet, it would be truly necessary for you to save it while it still exists. Without ample water supply, the planet may struggle to provide the needed water for everyone, which can then affect your daily lives as well as the lives of animals and plants.
Aside from keeping the water supply stable, another reason why you should conserve water is to minimise water shortages or drought. Water shortages or drought have often impacted not only the daily lives of the people but also the food supply of humans. The lack of water for irrigation may lead to the withering of crops. This issue may also cause animals to get sick and eventually die. As food supply diminishes, the demand for food may increase, which can then pose another problem to everyone.
Conserving water is important as it can help maintain the health and safety of everyone. Clean water can help in maintaining the personal hygiene of people. As long as clean water can be accessed by many people, the risks of spreading diseases can be reduced.
Even if you have already done your part in sustaining enough water supply for the community, you must still save water for the benefit of your family. After all, conserving water can provide you with significant savings in terms of costs and energy. Water often comes from a local supplier that regulates the water distribution. And as more water is consumed, the higher your utility bills are. Conserving water, therefore, can help you minimise utility costs as less water is used.
Save Water with Mixermate Thermostatic Taps
Various behavioural changes can help you save tons of water. First, you may want to shorten the time of the tasks that require running water on your taps. Second, you must ensure regular maintenance and repairs of your fittings, especially if you have encountered some problems. Last, you must remember to turn off the taps once they are not needed anymore.
An upgrade to your fittings, however, can also help you conserve tons of water. Our very own Mixermate thermostatic taps can provide some assistance in conserving water since they only release water you need. Additionally, they can alter the temperature of your water without wasting the said resource.
To find out more about thermostatic taps, you can call us at Mixermate Australia.
The bathroom is known to be one of the most important areas in home properties. Without considering its features thoroughly, home occupants and visitors will find it difficult to sustain and maintain personal hygiene. They would also feel incomplete, especially if some elements are missing from the bathroom.
One feature of a bathroom that should not be skipped is the single lever tapware. While most home properties before can already settle with conventional types of bathroom taps, the advancements in creating and manufacturing taps have significantly improved over the past few years. The introduction of single lever taps to the market helps a lot of property owners due to the benefits that they bring.
Ease of Operation
Perhaps, one of the most notable benefits of single lever taps is that they are easy to operate. Single lever taps are taps that utilise only one lever in controlling the flow and temperature of the water. Turning the lever to the left typically makes the water hot, while turning it to the right produces cold water from the tap. Alternatively, the water flow can easily change depending on the elevation of the lever from its resting position. Lifting the lever higher may yield a stronger water flow while placing it closer to the resting position can produce a weaker water flow. These functions make the taps great for home properties.
Safe and Reliable
Another benefit of single lever taps is that they are extremely safe. With the integration of mixer technology, single lever taps can effectively produce water based on the intended specifications of the users. The minimum and maximum temperature of the water that would come out of the taps should only stay within the specified range. The control over water temperature is likewise supplemented by the working principles of the lever. So, with single lever taps, property owners and other users will now be free from scalding incidents and other accidents that are typically associated with hot water exposure.
Massive Savings
One more benefit of single lever taps is that they can save a lot of resources. One of the resources that can be saved with these taps is water. The use of a single lever can already resolve the issue of processing water supply since it spontaneously increases or decreases the temperature of the water. Time is likewise saved with the use of single lever taps. The process of cooling or heating the water happens right away whenever the taps are used. Without any delays, these taps can easily help people carry out their activities. And as the more water is saved, the less money is spent and consumed.
All these benefits are already enough for you to change your old bathroom taps into single lever taps. For single lever tap needs, feel free to contact us at Mixermate Australia. We can turn any hot and cold tap into an easy-to-use single lever mixer tap and can be installed in around 1 hour.
When taking hot showers, you are expected to receive a lot of improvements in your physical and mental health. For one, taking hot showers can reduce your blood sugar. It can likewise improve your blood pressure and blood circulation. Hot showers can even aid in terms of relieving muscle tension and symptoms of cold or flu. Your overall skin and sleep cycle are also expected to improve.
But before you could attain and enjoy these previously stated benefits, your shower fittings and other associated components must operate perfectly. If they suddenly fail to operate optimally, then the water temperature of your shower may become too hot for human skin to handle.
Once you are exposed to scorching hot water, you may experience hot water scalding.
Common Effects of Hot Water Scalding
The effects of hot water scalding may vary depending on the seriousness of the burn. But once your skin is burned by the hot water from your shower, some tissues and cells of your body can be damaged.
Essentially, there are four categories of burns that are based on the degree of skin damage.
Hot water scalding, in all degrees, can be dangerous. So, even if some incidents of scalds are mild, they must still be treated right away.
Thermostatic Shower is the Solution
There are tons of ways that can prevent you from obtaining scalds. For one, you can first test the water temperature with your hand or elbow before exposing your entire body to the shower. Additionally, you must monitor the temperature of your water heater and other related components.
You can also add a thermostatic shower to your bathroom as it has components that can effectively provide optimum hot water without the risks of getting hot water scalds. This type of fitting can ensure that the right water temperature is achieved all the time. It even has components that can cut off the water supply immediately once the water exceeds the preferred temperature.
To find out more about thermostatic showers, feel free to call us at Mixermate Australia.
Thermostatic showers are being used by many properties today due to their accompanying benefits. They can maintain the temperature of the water being released throughout their usage. These fittings can likewise ensure that the water flow will be stopped once the water temperature has not reached the preferred temperature of the property owners, preventing any scalding incidents.
Given the benefits of thermostatic showers, we, at Mixermate Australia, saw the need to release Mixermate thermostatic showers. Catering to tons of households, hospitals, nursing homes, care facilities, and retirement villages, our showers can provide all the benefits that have been previously mentioned.
If you will be purchasing Mixermate showers, then here are some installation steps that you should follow.
Turn off Water and Remove Old Fittings
Since you will be replacing your old shower fitting with the new one, you must ensure that your water supply will be turned off. Once the water supply is turned off, you must remove the old tap, including the washers and other associated components. Subsequently, you should clean the tap seats with reseating tools so they can be suitable for the O-ring.
Fit the O-Ring and Locking Nut Fittings
After reseating the tap seats, you must now fit the 2-piece O-ring and locking nut fittings with the copper tubes. The copper tubes, at this point, should protrude out of the wall and be installed in each tap hole. You must then measure the copper tubes by at least 30mm off the wall, cut out the excess, ream out the cut ends, and ensure that no fillings will be left.
Once the copper tubes are cut out, you must install them again to the tap holes. The 2-piece O-ring and locking nut fittings must then be reinstalled. The 2-piece O-ring should have a small amount of O-ring lube before installation. The thread, alternatively, must be roughed up on the locking nut. Around 6 loops of white Teflon tape must be added to the thread before tightening the locking nut onto the O-ring fitting.
Measure and Install the Mixermate Tap
The next step for the Mixermate tap installation is to measure the Mixermate tap before its installation. You must centre the tap between the copper tubes that are already installed and mark the copper tube out of the tap. The marking must be 10mm back from the centre of the copper coming out of the wall. Once marked, the excess copper must be cut, reamed out, and free from any fillings.
Teflon tape, at this point, must be used to tape over and around the copper olives. The elbows must then be tightened onto the copper tube of the Mixermate tap. Subsequently, the mixer must be installed onto its intended position by tightening the other elbow nuts. Once the Mixermate tap is in the position, you must ensure that it is in the off position before turning the water supply back on. The cover can then be installed once the wall is cleaned. Silicone should be used to secure the cover to the wall.
The final steps would involve fitting the shower hose, installing the mixer handle, and installing the shower cradle. The finished product is expected to be easy to use and can function effectively.
Washing dishes, doing the laundry, taking a bath or shower, and even handwashing all require water that has stable flow and appropriate temperature. Without achieving these elements, a lot of people might acquire skin injuries that can be costly and dangerous.
To keep the water running smoothly and appropriately, more and more property owners now integrate thermostatic mixers into their water supply. The installation of these mixers allows people to conduct the previously mentioned activities with the right water flow and temperature as they can be controlled effectively. These mixers likewise have mechanisms that could prevent them from releasing water that does not meet the desired temperature of the users.
Thermostatic mixers have several parts and components that allow them to be useful and effective for different properties and purposes. Some of these parts are as follows:
Thermostatic Element
Thermostatic element is a component of thermostatic mixers that can contract and expand depending on the water temperature. As the size of this component increases or decreases, the piston, on the other hand, moves up and down. The movement of the piston, at this point, can effectively change the amount of hot and cold water in the valve. Once the water temperature does not meet the user requirements, the piston can help in shutting off the release of the water supply.
Piston
As previously stated, the piston is connected to the thermostatic element. Its movement depends hugely on the behaviour of the thermostatic element. Once the thermostatic element expands due to heat increase, the piston will subsequently move to effectively balance the proportion of cold and hot water inside the thermostatic mixer. If ever the mixer fails to provide the needed water temperature, the piston will immediately shut off, preventing any instances of scalding and skin injuries.
Return Spring
Working in opposition to the piston, the return spring plays a vital role in keeping the functions of components optimal. The water temperature inside the mixer can change all the time. After the contraction of the piston due to a decrease in heat, the return spring will work to revert the piston to its default placement. With returning spring, it can effectively reduce the amount of cold water inside the thermostatic mixer and achieve water temperature based on the user preferences.
Temperature Control
A thermostatic mixer will not be complete if it does not have temperature control. The temperature control or adjuster of the thermostatic mixer is often accessed to effectively manage the water temperature of the mixer. Once the desired water temperature is set, it will subsequently adjust the position of the piston so that an appropriate amount of hot and cold water will be utilised in the thermostatic mixer. The adjustment of the piston through the temperature control can change the proportions of hot and cold water.
To know more about thermostatic mixers and some reasons why you should install them, then feel free to reach us at Mixermate Australia. We supply easy-to-use and anti-scald tapware that is ideal for hospitals, nursing homes, care facilities, retirement villages, and private homes.
Homeowners typically have showers and taps on their properties so that their family members and visitors can use them anytime they want. Alternatively, owners of commercial properties, especially those who run healthcare, leisure, or multifamily properties, use these same fittings to make sure that their visitors, patients, or guests can stay clean and safe from diseases.
The presence of these fittings can benefit both types of properties. With showers and taps, people are assured of proper hygiene all the time. They can likewise feel more comfortable and relaxed, as long as the temperature of these fittings is appropriate and acceptable.
The Best Water Temperature for Shower and Tap
But before occupants of these properties can truly take advantage of showers and taps, the fittings must produce the best water temperature throughout their operations. The mere presence of the showers and taps cannot provide benefits to the users if they will produce very hot or cold waters. Instead, they might only cause harm to the people, especially to those who may have a hard time turning them off.
Showers and taps are known for producing up to 60°C so that bacteria growth in the waters can be stopped. However, many doctors suggest that users of showers and taps must only use waters of around 44 to 48°C to avoid scalding and to effectively remove dirt, bacteria, and other similar microbes on their bodies. Children, however, must only utilise water temperatures of 37 to 38°C to prevent injuries.
Maintaining the optimal temperatures of showers and taps can already provide great benefits to the users. Their overall mood can improve significantly. The same improvements can also be seen with their body system, particularly to the organs and blood vessels. Exceeding beyond this temperature range, on the other hand, allows specific skin layer to somehow melt away and subsequently cause skin injuries.
Thermostatic Mixers Can Bring A Lot of Benefits
To effectively maintain scalding and the growth of microbes on the water, property owners should install thermostatic mixers for their showers and taps. Through thermostatic mixers, homeowners can limit their shower and tap water temperatures up to 50°C. Properties that cater to children, the elderly, or people with disabilities, on the other hand, can set the thermostatic mixers’ temperature at around 44 to 45°C.
Through the installation of thermostatic mixers, properties are expected to receive the set water temperatures without any issues. Since these mixers can easily mix and blend hot water and cold water all the time, they are assured to provide the needed shower and tap waters instantly. And if the temperature rises above the limit temperatures, specific valves inside the thermostatic mixers will not produce any water to showers and taps until it goes back to normal.
Aside from being safe, thermostatic mixers can ensure that the water supply will not be wasted. Unnecessary heating and slowdowns that typically plagued other water supply fittings are guaranteed to be not experienced with thermostatic mixers.
To obtain your own thermostatic mixer, feel free to reach us at Mixermate Australia.
Homeowners often want the best for their families, which is why they would normally plan the design of their properties according to their preferences. Additionally, they would ensure that the spaces inside their properties will not only look good but are also functional to fully maximise everything.
But aside from looks and functionality, homeowners also want to make their properties energy-efficient. Given the rising cost of non-renewable energy, homeowners and their families want to ensure that most elements of their properties can conserve power. From the overall layout to the included fittings and appliances, they often design their properties with energy savings in mind.
One type of fitting that can make properties energy-efficient is the thermostatic mixer. Thermostatic mixers are often utilised in bathrooms to produce water at the desired temperature. Their overall composition and features allow them to effectively save energy, time, and money.
The Working Principles of Thermostatic Mixers
Thermostatic mixers, as previously mentioned, are normally used in bathrooms to produce water at the preferred temperature. Normally, these fittings work by combining hot and cold water so that the water will not cause any scalding or shivering to the ones who are using them.
The functionality of thermostatic mixers is possible since they typically utilise a piston and a return spring inside that can both guarantee consistent water flow and temperature throughout their operations. As for the outside, the thermostatic mixers are often controlled by knobs, a lever, or any other convenient access points. The presence of these elements allows the mixers to be controlled by anyone, most specifically when it comes to the water temperature and overall flow.
Features and Benefits of Thermostatic Mixers
Now, adding thermostatic mixers will not only grant you consistent water flow and temperature, but they can also give you an energy-efficient home. Since they can easily provide water based on your preferred temperature, the need for external devices for heating will be eliminated. And without these heating devices, the amount of energy that will be consumed can be cut significantly.
Another great thing about thermostatic mixers is that they can save a lot of time. The very existence of thermostatic mixers on your property allows you to take a shower or a quick bath without any delays. You do not have to wait for the water to achieve your preferred temperature as thermostatic mixers can already provide it right away. The water itself is also saved with thermostatic mixers since they do not have to waste some water just to achieve the desired water temperature and flow.
Ultimately, thermostatic mixers are safe to use since they have mechanisms that can immediately stop the water output if its temperature exceeds the maximum pre-set limit. Their knobs, lever, or other access points likewise enhance the safety of thermostatic mixers as they can be easily opened and closed by anyone, which include children, the elderly, and those who have physical disabilities.
Purchase and Install Thermostatic Mixers Today
If you want to make your home energy-efficient with thermostatic mixers, just contact us at Mixermate Australia today. We can turn any hot and cold tap into an easy-to-use single-lever mixer tap and can be installed in around 1 hour.
Hospitals and other healthcare facilities cater to the medical needs of people. And through these facilities, those who may be injured or are sick can be treated optimally, especially to the ones who are required to stay in these places for a specific amount of time.
One element that these facilities should have and possess is thermostatic tapware. Patients who are going and using the restrooms often wash their hands as part of their hygiene. Even doctors and other healthcare professionals have to maintain cleanliness by washing their hands. To ensure that their hands will be cleaned, they should utilise hot water to effectively get rid of bacteria and germs.
Thermostatic tapware can provide hot water to hospitals and other healthcare facilities without causing scalding and burning. It likewise has the following features that can be beneficial for these places.
Safe Water Output
A notable feature of thermostatic tapware that other types do not possess is guaranteed safety. Thermostatic tapware, with the help of a professional plumber, is known to limit the temperatures of the water that is being released for consumption. Aside from setting the limits of the water temperatures, this specific type of tapware can adjust the water pressure to the optimal level, ensuring that the water supply will not fluctuate frequently. All these limitations allow tap users to be free from scalding and burning.
Ensured Hygiene
With the presence of hot water alone, the installation of thermostatic tapware on hospitals and healthcare facilities can help ensure the proper hygiene of the people in these places. The combination of hot water and soap can effectively get rid of harmful microorganisms among patients and healthcare professionals, which then protects them from getting sick or spreading diseases. Hygiene is also maintained by the tapware’s lever as people do not need to touch it firmly for it to work.
Ergonomic Design
Another great feature of thermostatic taps is that they can be operated by a single lever. The lever itself can control the temperature of the water if ever someone uses the thermostatic tap. Elderly, disabled, and those with arthritic conditions can even adjust the water output and temperature of the tap by just controlling the lever, allowing this type of tap to be very useful in healthcare settings. With just one hand, users of the taps can enjoy the benefits of hot water without any difficulties.
Significant Savings
Since both cold and hot water can be regulated by the thermostatic tapware, it can easily provide hospitals and healthcare facilities significant savings when it comes to overall water consumption. With this specific type of tapware, energy is often maximised only if water is needed. So, once the tapware is closed, it will not consume energy in combining water that is not truly required or needed. Savings on both water and energy can increase significantly with these taps.
If you want to obtain thermostatic tapware for your hospital or healthcare facility, feel free to contact us at Mixermate Australia. We supply and install easy-to-use and anti-scald tapware that is ideal for hospitals, nursing homes, care facilities, retirement villages, and private homes.
Phone: (03) 9583 0965
Mobile: 0411 072 132
Email: bruce@gbrand.com.au